EC21, Global B2B Marketplace
Sign In
Join Free
Buy Now
Sell Now
My EC21
Help
Search Advanced Search
Suppliers > property > Jingsu Liangyi Co.,Ltd | Matching Products
Your search for "

property

" found 40 companies from Jingsu Liangyi Co.,Ltd, China
Inquire Now

(1-20 out of 40)

1.2888 (X20CoCrWMo10-9 / RM10Co) Forged Parts Hot-Work Tool Steel Discs, Blocks & Extrusion Dies

1.2888 (X20CoCrWMo10-9 / RM10Co) Forged Parts Hot-Work Tool Steel Discs, Blocks & Extrusion Dies
Properties & heat treatment A high-alloy hot-work tool steel with extreme tempering resistance and hot hardness: it retains hardness and strength at sustained elevated temperature far better than ...

31CrMoV9 (W.Nr. 1.8519) Nitriding Steel Forging Parts EN 10085 Cr-Mo-V Bars, Rings, Gear & Rotor

31CrMoV9 (W.Nr. 1.8519) Nitriding Steel Forging Parts EN 10085 Cr-Mo-V Bars, Rings, Gear & Rotor
Properties & heat treatment Quenched and tempered to a tough core, then nitrided to a very hard surface (up to ~800 HV) for wear and fatigue resistance, with good stability to elevated temperature. ...

32CrMo12 (W.Nr. 1.7361) Forging Parts EN 10250-3 Cr-Mo Alloy Steel Bars, Rings

32CrMo12 (W.Nr. 1.7361) Forging Parts EN 10250-3 Cr-Mo Alloy Steel Bars, Rings
32CrMo12 — designated W.Nr. 1.7361 — is a European 3% chromium-molybdenum alloy steel with excellent comprehensive mechanical properties, high fatigue resistance and deep hardenability, giving ...

1.7383 (11CrMo9-10) Forging Parts Heat-Resistant Bars, Rings, Valve Bodies, Headers for Power

1.7383 (11CrMo9-10) Forging Parts Heat-Resistant Bars, Rings, Valve Bodies, Headers for Power
Properties & heat treatment Supplied normalised and tempered for elevated-temperature service: typical tensile ~540–690 MPa, yield ≥310 MPa, with strong creep-rupture strength and high-temperature ...

1.2714 (55NiCrMoV7 / AISI L6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts

1.2714 (55NiCrMoV7 / AISI L6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts
Properties & heat treatment Oil- or air-hardening with excellent toughness, through-hardenability and little size change; working hardness typically ~38–48 HRC (L6 can reach >60 HRC in thin ...

31CrMo12 (W.Nr. 1.8515) Nitriding Steel Forging Parts EN 10085 Cr-Mo Bars, Rings, Gear & Extruder

31CrMo12 (W.Nr. 1.8515) Nitriding Steel Forging Parts EN 10085 Cr-Mo Bars, Rings, Gear & Extruder
Properties & heat treatment Quenched and tempered to a tough core, then nitrided to a very hard surface (up to ~800 HV) for wear and fatigue resistance; the Al-free, high-Cr chemistry suits large ...

1.2713 (55NiCrMoV6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts for Forging Dies

1.2713 (55NiCrMoV6) Forging Parts Hot-Work Die Steel Bars, Blocks, Rings & Shafts for Forging Dies
Properties & heat treatment Supplied soft annealed for machining or quenched and tempered to a working hardness (typically ~38–48 HRC): soft anneal 650–700 °C (slow furnace cool); harden ~830–870 °C, ...

1.4958 (X5NiCrAlTi31-20) Forging Parts EN 10095 Heat-Resistant Austenitic Bars, Rings, Tube Sheets

1.4958 (X5NiCrAlTi31-20) Forging Parts EN 10095 Heat-Resistant Austenitic Bars, Rings, Tube Sheets
1.4958 — EN chemical name X5NiCrAlTi31-20 — is a high-alloy austenitic heat-resistant nickel-iron-chromium steel (≈31% Ni, 20% Cr, with titanium and aluminium) offering good high-temperature ...

EN26 / 826M40 (1.6745 / 40NiCrMo10-5) Forging Parts High-Tensile Bars, Rings, Crank & Gear Shafts

EN26 / 826M40 (1.6745 / 40NiCrMo10-5) Forging Parts High-Tensile Bars, Rings, Crank & Gear Shafts
Properties & heat treatment Through-hardening with high hardenability: commonly supplied hardened and tempered in Condition V (tensile 1,000–1,150 MPa, Rc 31–38), with the full range 850 to >1,550 ...

AISI 4130 (25CrMo4 / 1.7218 / 708A25 / SCM430) Forged Parts Alloy Steel Bars, Rings, Shafts

AISI 4130 (25CrMo4 / 1.7218 / 708A25 / SCM430) Forged Parts Alloy Steel Bars, Rings, Shafts
Properties & heat treatment A weldable Cr-Mo tempering steel: typical quenched-and-tempered tensile ~700–950 MPa with good toughness; also supplied normalised or normalised-and-tempered. Forge 1 ...

1.4923 (X22CrMoV12-1) Forging Material 12% Cr Martensitic Heat-Resisting Steel Bars

1.4923 (X22CrMoV12-1) Forging Material 12% Cr Martensitic Heat-Resisting Steel Bars
Properties & heat treatment Quenched and tempered to a uniform tempered-martensite structure: +QT1 (≤160 mm) Rm 800–950 MPa, Re ≥600 MPa, A ≥14%, KV ≥27 J; +QT2 Rm 900–1,050 MPa, Re ≥700 MPa, A ≥11%, ...

1.6985 (28CrMoNiV4-9) Turbine Rotor Forging Material SEW 555 Cr-Mo-Ni-V Monobloc Rotor & Generator

1.6985 (28CrMoNiV4-9) Turbine Rotor Forging Material SEW 555 Cr-Mo-Ni-V Monobloc Rotor & Generator
property consistency. Jiangsu Liangyi certifies forgings to SEW 555. Product range Steam/gas-turbine monobloc rotor shafts (HP/IP/LP), generator rotor shafts; turbine discs; valve seats, valve stems ...

1.6946 (30CrMoNiV5-11) Turbine Rotor Forging Steel SEW 555 Cr-Mo-Ni-V Rotor Shafts

1.6946 (30CrMoNiV5-11) Turbine Rotor Forging Steel SEW 555 Cr-Mo-Ni-V Rotor Shafts
Properties & heat treatment Hardened and tempered to a strong, creep-resistant condition with required yield, tensile, elongation and impact values at room and elevated temperature; verified by ...

Inconel 690 (Alloy 690 / UNS N06690 / W.Nr. 2.4642) Forgings ASTM B166 / B564 Bars, Rings

Inconel 690 (Alloy 690 / UNS N06690 / W.Nr. 2.4642) Forgings ASTM B166 / B564 Bars, Rings
properties (solution annealed) Tensile ≥586 MPa · yield (0.2%) ≥240 MPa · elongation ≥30% · density 8.19 g/cm³. Solid-solution alloy — not age-hardenable; higher strength is developed by cold ...

39NiCrMo3 (W.Nr. 1.6510) Forging Parts EN 10083-3 Ni-Cr-Mo Bars, Rings, Gear & Crank Shafts

39NiCrMo3 (W.Nr. 1.6510) Forging Parts EN 10083-3 Ni-Cr-Mo Bars, Rings, Gear & Crank Shafts
39NiCrMo3 — designated W.Nr. 1.6510 — is a European quenched-and-tempered nickel-chromium-molybdenum alloy structural steel with high hardenability, delivering high strength, toughness and fatigue ...

1.4558 (X2NiCrAlTi32-20) Forging Parts EN 10216-5 Bars, Rings, Tubesheets

1.4558 (X2NiCrAlTi32-20) Forging Parts EN 10216-5 Bars, Rings, Tubesheets
Properties & heat treatment Super-austenitic, non-hardenable by heat treatment: supplied solution treated for optimum corrosion resistance and a stable austenitic structure. The aluminium-titanium ...

AISI 4150 (SAE 4150 / 50CrMo4) Forging Parts Alloy Steel Bars, Rings, Shafts & Gears for Mining

AISI 4150 (SAE 4150 / 50CrMo4) Forging Parts Alloy Steel Bars, Rings, Shafts & Gears for Mining
Properties & heat treatment A through-hardening Cr-Mo steel supplied quenched and tempered: harden ~830–860 °C with oil quench, temper 480–600 °C to suit section and target strength; normalising and ...

21MnCr5 (W.Nr. 1.2162) Forged Parts DIN EN 10084 Case-Hardening Steel Bars, Rings, Die Blocks

21MnCr5 (W.Nr. 1.2162) Forged Parts DIN EN 10084 Case-Hardening Steel Bars, Rings, Die Blocks
Properties & heat treatment Supplied soft annealed (≤230 HB) for machining, then carburised and hardened to a stable ~60 HRC surface over a tough core: soft anneal 670–710 °C; carburise 900–950 °C; ...

1.5415 (16Mo3 / 15Mo3) Forging Parts EN 10028-2 Molybdenum Pressure-Vessel Steel Bars, Rings, Tube

1.5415 (16Mo3 / 15Mo3) Forging Parts EN 10028-2 Molybdenum Pressure-Vessel Steel Bars, Rings, Tube
Properties & heat treatment Supplied normalised, or normalised and tempered (+N / +NT), for elevated-temperature service: typical room-temperature tensile ~440–590 MPa, yield ≥275 MPa, with good ...

AL-6XN (UNS N08367 / ASTM A182 F62) Forged Parts Bars, Rings, Valve Bodies for Seawater

AL-6XN (UNS N08367 / ASTM A182 F62) Forged Parts Bars, Rings, Valve Bodies for Seawater
properties (solution annealed) Tensile ≥655 MPa (95 ksi) · yield (0.2%) ≥310 MPa (45 ksi) · elongation ≥30% · PREN ≈ 47 — well above 316L (~24) and a cost-effective alternative to nickel-base ...
Page 1 of 212Next  
Go to Page Go
Share :
Facebook
Twitter
LinkedIn
My Favorites
Email this page

Browse: Manufacturer Directory Premium Suppliers Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

Copyright (c)1997-2026 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931 | Mall order sales Registration Number: 강남-5838

Inquiry Basket ()