Buy Aluminium Rods
Date Posted :
2007-06-09
Valid Until :
2007-01-08
( A ) ALUMINIUM RODS OF DIA. 9.5MM OR INGOTS
QUANTITY = 100 MT PER MONTH IMMEDIATELY
SV-PS- 018e Rev. 00
PURCHASE SPECIFICATION
E C Aluminium Rods
1. Scope:
This Specification covers the requirements of E.C. Grade Aluminium Rods produced by
continuous casting and rolling for drawing into wire for electrical conductors.
The rod
shall conform to the requirements of IS : 5484 �C 1978 as given in Clause 2 to 5 below
and shall also satisfy the additional requirements laid down in 6, 7 and 8.
2. MATERIAL:
The material shall have the following chemical composition.
Constituent Requirements
Aluminium (Minimum) 99.6%
Silicon (Maximum) 0.13%
Iron (Maximum) 0.30%
Copper (Maximum) 0.04%
Titanium + Vanadium ( Maximum) 0.02%
Manganese, Zirconium ( Maximum ) 0.01% each
& Chromium
Suppliers Certificate shall contain
3. QUANTITY:
The Aluminium shall comply with the following requirements:-
3.1 The conductivity of Aluminium shall be not less than 35.38 S.m/mm²/61% IACS at
20ºC (corresponding to maximum volume resistivity of 2.8264 micro ohm �C cm at
20ºC).
3.2 At a temperature of 20ºC, density of Aluminium shall be 2.703 gm/cc.
If you can't find more Buying Leads related to your items, why not post your Products instead?
It will let your potential buyers to contact you directly.