Home > Sell Now > Rubber & Plastics > Plastic Raw Materials > Other Plastic Raw Materials >

Buy Polyvinyl Chloride (PVC) Liners

Date Posted :	2009-03-13
Valid until :	2009-03-27

Sign in to view this member's contact information

Member ID :

Password :

Forgot your ID/Password?

This buyer has chosen to show contact information to all members.
You may sign in to view contact details and send an inquiry.

Polyvinyl chloride liners

1. Resin: New, first-quality material; compounded and manufactured specifically for the purpose of producing the specified geomembranes; all of the same type; do not blend with recycles or seconds. The finished compound shall be uniform in color, thickness, size and surface texture.

2. Thickness: 80-mil.

3. Material: Polyvinyl chloride (PVC) weight of processing aids, antioxidants and other additives other than carbon black, not more than 1% by weight of finished geomembrane and not more than 3% by weight with carbon black; produced in the United States; no holes, pinholes, bubbles, blisters, gels or undispersed resins and undispersed carbon black; no contamination by foreign matter; no nicks and cuts on roll edges; supplied in rolls; minimum panel width not less than 5 m; identify each roll labeled indicating thickness, length and width; manufacturer, plant location; meeting the following specifications:

Property Test Method Requirement

Sheet Thickness ASTM D1593 Para. 8.1.3 30 mils
Minimum
Average 30 mils
Density ASTM D792 Method A >1.20 g/cm3
Tensile Strength at Break ASTM D882 Method A or Min 69 lb per in. width
B
Elongation at Break ASTM D882 Method A or Min 300%
B
Modulus at 100% Elongation ASTM D882 Method A or Min 27 lb per in width
B
Low Temperature Impact ASTM D1790 <-20 deg F
Tear Resistance ASTM D1004 Die C min. 8 lb
Water Extraction ASTM D3083 -0.35% max
(as modified by NSF)
Volatile Loss ASTM D1203 Method A 0.7% max
Dimensional Stability (each ASTM D1204 212 5% max. change
direction) 15 min.
Hydrostatic Resistance ASTM D751 Method A >82 lb/in2
Resistance to Soil Burial ASTM D3083
1. Breaking Factor <5%
2. Elongation at Break <20%
3. Modulus at 100% Elongation <20%

If you can’t find more Buying Leads related to your items, why not post your Selling Leads and Products instead? It will let your potential buyers to contact you directly.